The size of a hydraulic hose is an essential factor in ensuring proper flow rate and system performance. It is determined by the inner diameter of the hose, which is the measure of the straight distance between the two farthest points on the inner surface of the tube. This measurement is usually given in inches, even if it is assigned a metric size designation. To determine the appropriate hose ID and D for your application, use the flow capacity nomogram.
The hydraulic power industry uses a system called dash numbers or dash sizes to identify the size of the hose and connector. The number of dashes indicates the inner diameter of a hose (I, D). Refer to the table on the dash numbers page for all details and exceptions. If the original print has worn out, you can cut the original hose and measure its inner diameter. Make sure to measure the total length of the assembly and its orientation before cutting it.
If there are no markings on the hose, you can measure its outer diameter with a ferrule to get an approximate indication of its size.Hydraulic Hose Flexibility - The hydraulic hose is flexible so you can mount it anywhere you need it for your project. This flexibility also affects its size.Pressure Drop - An increase in length can also increase pressure drop in a hydraulic hose system due to friction. This makes sizing an important factor when selecting a hydraulic hose for your project.Measuring Hydraulic Hose - The most reliable way to check its size is to measure its inner diameter. This will vary for each type of hose and ferrule, but common sizes are cited in program data.Hydraulic Hose Cap - A sturdy cover is essential for protecting a hydraulic hose and providing stable performance.
Here are some important size specifications for measuring a hydraulic hose: inner diameter, outer diameter and overall length. Consider rubber-coated hydraulic hoses with braided steel, which provide an excellent combination of flexibility and durability. These hoses can be used in high-temperature environments within a range of -22℃ to 120℃, or even at lower or higher temperatures. For example, the R2T hose has 2 braids of wire and is commonly used for low to medium pressure hydraulic fluids. Accurately measuring the size of a hydraulic hose is essential for ensuring proper flow rate and system performance. To get an accurate measurement, use a flow capacity nomogram or measure its inner diameter with a ferrule. Consider rubber-coated hoses with braided steel for excellent flexibility and durability in high-temperature environments.
Make sure to measure the total length of the assembly and its orientation before cutting it.